Передатчик веса TLB

Основные характеристики

  • 1: 16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V;
  • 2: RS485 port (Modbus RTU/Laumas ASCII protocol);
  • 3: 2 logic inputs, 3 relay outputs;
  • 4: OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI;
  • 5: OIML R61 - WELMEC Guide 8.8:2011 (M.I.D.);
  • 6: Back panel mounting on Omega/DIN rail;
  • 7: A/D converter 24bit (16000000 points) 4.8 kHz;
  • 8: Display range 999999;

Применение

Получить консультацию по продукту:

Файлы документации:

Описание продукта

Weight transmitter/indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 25 x 115 x 120 mm.

DESCRIPTION CODE
1    RS485 serial port.
Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s).
TLB485
2 Optoisolated 16 bit analog output.
Current: 0÷20 mA; 4÷20 mA (up to 300 Ω).
Voltage: 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 kΩ).
Equipped with RS485 serial port.
TLB
3 CANopen port.
Baud rate: 10, 20, 25, 50, 100, 125, 250, 500, 800, 1000 (kbit/s).
The instrument works as slave in a synchronous CANopen network. Equipped with RS485 serial port.
TLBCANOPEN
4 DeviceNet port.
Baud rate: 125, 250, 500 (kbit/s).
The instrument works as slave in a DeviceNet network. Equipped with RS485 serial port.
TLBDEVICENET
5 CC-Link port.
Baud rate: 156, 625, 2500, 5000, 10000 (kbit/s).
The instrument works as Remote Device Station in a CC-Link network and occupies 3 stations. Equipped with RS485 serial port.
TLBCCLINK
6 PROFIBUS DP port.
Baud rate: up to 12 Mbit/s.
The instrument works as slave in a Profibus-DP network. Equipped with RS485 serial port.
TLBPROFI
7 Modbus/TCP port.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
The instrument works as slave in a Modbus/TCP network. Equipped with RS485 serial port.
TLBMODBUSTCP
8 Ethernet TCP/IP port.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
The instrument works in an Ethernet TCP/IP network and it is accessible via web browser. Equipped with RS485 serial port.
TLBETHETCP
9 2x Ethernet/IP ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
The instrument works as adapter in an Ethernet/IP network. Equipped with RS485 serial port.
TLBETHEIP
10 2x PROFINET IO ports. Type: RJ45 100Base-TX.
The instrument works as device in a Profinet IO network. Equipped with RS485 serial port.
TLBPROFINETIO
11 2x EtherCAT ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in an EtherCAT network. Equipped with RS485 serial port.
TLBETHERCAT
12 2x POWERLINK ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in a Powerlink network. Equipped with RS485 serial port.
TLBPOWERLINK
13 2x SERCOS III ports.
Type: RJ45 10Base-T or 100Base-TX (auto-sensing). The instrument works as slave in a Sercos III network. Equipped with RS485 serial port.
TLBSERCOS

 

1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд (Пока оценок нет)
Загрузка...