Модуль расширения Kinco K523-16DR
Основные характеристики
- Input point: 8, totally classified into 1 group;
- Input type: Source (common-cathode)/sink (common-anode);
- Signal indication: Separated LED indicates for each channel;
Применение
Модули расширения Kinco – необходимое дополнение для расширения технических возможностей ПЛК.
Файлы документации:
Описание продукта
Technical Specifications
I/O point | 8, totally classified into 1 group |
Input type | Source (common-cathode)/sink (common-anode) |
Input voltage | Rated DC24V, voltage range of logic “1” is DC11~30V |
Output type | Relay |
Load voltage | Max. DC30V/AC250V, max. load current of each channel is 2A |
Isolation mode | DI channels adopt opto-electrical isolation, DO channels adopt relay isolation |
Signal indication | Separated LED indicates for each channel |
Module width | 75mm |
Сопутствующие товары
-
Весовой контроллер BST106-B68
- Корпус: Металл (панельное исполнение);
- Класс защиты: IP50;
- Гарантия: 12 месяцев;
-
Блок питания PS-2402
- Wide range of input voltage: 100~240VAC Short-circuit protection;
- No load power consumption: <0.75W 100% full load aging test;
-
Kinco PLC K506EA-30AT
- Built-in I/O points: 30 I/O, DI 14*DC24V, DO 10*DC24V, DO is transistor output, AI 4*IV, AO 2*IV, AI/AO support 4-20mA/1-5V/0-20mA/0-10V signal forms;
- Connectable expansion modules: Yes. At most 9 expansion modules;